Disclaimer - Please note I only recommend professionals undertake any work on vehicles. Spdkilz.com is not liable for any damage or harm that may come from the use of instructions given in the following how-to section(s).
 

 

. : List of Materials Needed : .
(1).  C5/Z06 Rear Clear Sidemarkers	(2).  New 194 size red bulbs or equal
(3).  T-15 Star Bit	(4).  7/16 Socket

 

(click on pictures for larger versions)

 

(1).  Remove the far left and far right taillight assemblies.  You can do this by using a T-15 star bit.  Remove the two screws and then gently pull the assembly toward you.  You will have to un-plug the lamp assemblies (press in tab, 1/4 turn counter clockwise).
(2).  If you look in through the hole, you can see how the sidemarker is held on.  I used a 7/16 socket and removed the two holders from the sidemarker.  Be sure to remove the bulb from the side marker assembly.
(3).  With the sidemarker now removed, your car should look like this.
(4).  Put the new clear sidemarkers in, re-do the above steps and you will have a sleek looking final product!

 

Top of Page